![background image](http://html1.mh-extra.com/html/nautilus-hyosung/monimax5300/monimax5300_service-manual_3516485131.webp)
Service Manual Chapter8. CDU
© 2016
Nautilus Hyosung Inc.
All Rights Reserved.
8-25
Adjustment Standard
Gate Adjustment
► Gate Adjustment
1. Loosen the solenoid M4 screw (2 places) as much as possible.
2. Adjust the solenoid position so that the gate is at least 1.5mm away from the shaft
when you pull the gate as shown in the below right figure.
3. Adjust the solenoid position so that the gate is 1.5mm away from the shaft, when
pulling the gate as shown in the right below figure.
4. Fix the solenoid M4 screws (2 places).