RC40 Control manual
73
otherwise contact technical
support;
e0x5111
Drive +15V out of
range
In15V voltage out of
range;
Drivers may need
maintenance, contact
technical support;
e0x5111
Drive 5V out of
range
5V power supply low or power
off;
May occur during power
outages;If the power is not
off, please contact technical
support;
e0x5180
Drive EEPROM
failure
Drive failure;
Contact technical support;
e0x5581
Drive CAN power
failure
The voltage supply problem
of internal CAN bus;
Drivers may need
maintenance, contact
technical support;
e0x5582 Self-test failure
Power on self-test failure, the
driver can not operate;
Contact technical support;
e0x5583
Parameter memory
and validation failed
The storage of drive
parameters is blank;
Contact technical support;
e0x5585 Write flash failed
The drive cannot be operated; Contact technical support;
e0x5586
Parameters not
configured
The drive needs to be
configured or reimported with
parameters;
Contact technical support;
e0x6581
The FPGA Config
failure
FPGA code load failure, the
driver can not operate;
Contact technical support;
e0x7081 Motor setup failed
Motor setup process failed,
this fault will disable the
driver;
Contact technical support;