RC40 Control manual
41
7) During maintenance, do not make the parts bear impact.In particular, data related parts, if
the impact, it will not only cause damage to the parts, but also may cause damage to the data
when read in, save.
8) Please be careful not to lose the screws removed during maintenance.Be sure to remove
the screw when it falls into the controller.Continued use without removal may result in a short
circuit and damage to components or equipment.
9) When replacing the motor driver module, please do not mistake the power number (watts).If
a motor driver module with a mismatched power number is installed, an error will occur.In
addition, it may cause the robot system to be unable to function normally.
10) The sequence of the corresponding manipulator is recorded on the controller No.Do not
mistake the connection.If the connection relationship is wrong, not only the robot system can
not function properly, but also may cause security problems.