RC40 Control manual
103
e0x4210
ANTI SURGE
resistance overheat
Surge resistance against
overheating
Contact technical support
e0x4310
Internal
regeneration or
External overheat
Internal regenerated
resistance overheats
Contact technical support
e0x3211 Over-voltage
The DC voltage of the main
circuit is too high
Contact technical support
e0x3220 DC under-voltage
The DC voltage of the main
circuit is too low
Contact technical support
e0x3130 lack-phase fault
One of the phase breaks in
the three-phase main circuit
power supply
Contact technical support
e0x5114 CPS under-voltage
Control supply voltage is too
low or voltage sag occurs
Contact technical support
e0x7305
Encoder
connecter1
disconnection
1.A. b. incremental encoder Z
believe bolt number;
2.The power cord wire break
Contact technical support
e0x7306
Encoder
connecter2
disconnection
1.A. b. Z believe full closed-
loop encoder, bolt 2.the
power cord wire break;
Contact technical support
e0x7300
Serial encoder
internal abnormal
1.Absolute value encoder
rotation amount of overflow;
2.More than ring counter
overflow;
Contact technical support