Nashuatec Aficio 10515 Page 78 Operating Instructions Manual Download

Page: 78 / 193

Settings You Can Change with User Tools

❖

Output: Document Server

You can specify a tray to which documents are delivered.

Note

❒

Default:

Not Registered

❒

For details about output trays, see p.66 “Output: Copier”.

❒

The default of the output tray may vary depending on the installed option-
al finisher.

❖

Output: Printer

You can specify a tray to which documents are delivered.

Note

❒

Default:

Not Registered

❒

The output trays set on the printer driver have priority over the output tray
specified above.

❒

The default of the output tray may vary depending on the installed option-
al finisher.

❖

Paper Tray Priority: Copier (Copier/ Document Server)

You can specify the paper tray for delivery.

Note

❒

Default:

Tray 1

❖

Paper Tray Priority: Printer (Printer)

You can specify the paper tray for delivery.

Note

❒

Default:

Tray 1

❖

Job List Display Time

You can set the length of time the job list screen is displayed before automat-
ically returning to the default screen.

Note

❒

Default:

15 seconds

❒

When you select “On”, enter the time from 10 to 999 seconds in 1 second
increments using the number keys.

❖

Time Interval between Printing Jobs

You can set the length of interval between the end of a job and the start of a
new job.

Note

❒

Default:

3 seconds

❒

If you select “Set Time”, enter the time, 0 - 999 seconds (in 1 second incre-
ments), using the number keys.

BelliniC2_GBzen_F_FM.book Page 67 Tuesday, December 17, 2002 5:56 PM

Summary of Contents for Aficio 10515


































































































































































































Search results

Summary of Contents for Aficio 10515

Reviews:

Related manuals for Aficio 10515

Brands by name

Popular brands

Nashuatec Aficio 10515, Operating Instructions Manual

Search results

Summary of Contents for Aficio 10515

Reviews:

Related manuals for Aficio 10515

Brands by name

Popular brands