Nashuatec Aficio 10515 Page 35 Operating Instructions Manual Download

Page: 35 / 193

Getting Started

Turning On the Power

This machine has two power switches.

❖

Operation switch (right front side of the exposure glass)

Press to activate the machine. Once the machine has warmed up, you can
make copies.

❖

Main power switch (left side of the machine)

When the machine will not be used for an extended period of time, turn off
the main power switch.

Note

❒

This machine automatically goes into Low Power mode, or turns itself off if
you do not use it for a specified period of time. See p.68 “Auto Off Timer” and
p.68 “Energy Saver Timer”.

Turning On the Main Power

AAAA

Make sure the power cord is firmly plugged into the wall outlet.

BBBB

Turn on the main power switch.

Make sure that the main powr indicator lights up.

Important

❒

Do not turn off the main power immediately after switching it on. Doing
so may result in damage to the hard disk or memory, leading to malfunc-
tion.

BelliniC2_GBzen_F_FM.book Page 24 Tuesday, December 17, 2002 5:56 PM

Summary of Contents for Aficio 10515


































































































































































































Search results

Summary of Contents for Aficio 10515

Reviews:

Related manuals for Aficio 10515

Brands by name

Popular brands

Nashuatec Aficio 10515, Operating Instructions Manual

Search results

Summary of Contents for Aficio 10515

Reviews:

Related manuals for Aficio 10515

Brands by name

Popular brands