Nashuatec Aficio 10515 Page 125 Operating Instructions Manual Download

Page: 125 / 193

Troubleshooting

114

Replacing Toner

• Open the toner cover.

Reference

For the location of the toner cover, see
p.17 “Guide to Components”.

• Push the green button to release the toner

bottle.

• Gently pull out the toner bottle gently.

Note

❒

Do not shake the toner bottle strongly or
toner might spill out.

• Remove the outer cap.

Note

❒

Do not remove the inner cap.

• Place the toner bottle in position, and then

push it in until the green button clicks.

Important

❒

Be sure to set the new toner bottle in the
lower hole first.

Note

❒

If you cannot get it to click in, pull out
the toner bottle a little, slightly rotate it
to the left or right, then try again.

• Return the button under the toner bottle to

its original position.

• Close the toner cover.

BelliniC2_GBzen_F_FM.book Page 114 Tuesday, December 17, 2002 5:56 PM

Summary of Contents for Aficio 10515


































































































































































































Search results

Summary of Contents for Aficio 10515

Reviews:

Related manuals for Aficio 10515

Brands by name

Popular brands

Nashuatec Aficio 10515, Operating Instructions Manual

Search results

Summary of Contents for Aficio 10515

Reviews:

Related manuals for Aficio 10515

Brands by name

Popular brands