Nashuatec Aficio 10515, Operating Instructions Manual

Page: 137 / 193

Troubleshooting
126
7
Important
❒
Confirm that the top of the stack is not higher than the limit mark inside
the tray.
❒
Align the right edge of the copy paper stack to the right edge of the tray.
DDDD
Set the paper size selector knob inside the tray to the new size.
Important
❒
Problems might occur if the size of the paper set does not match the paper
size selector, such as:
• Misfeeds
• Parts of the image are not copied
To adjust the paper size to one not available on the paper size selector
A
Set the paper size selector knob to the
p
p p
p
mark on the left.
B
Press the
{{{{
Tray Paper Settings
}}}}
key.
C
Press [ Paper Size ] .
D
Select the size, and then press [ OK ] .
E
Press [ Exit ] or press the
{{{{
Tray Paper Settings
}}}}
key to exit the Tray Paper Set-
ting.
EEEE
Gently push the paper tray until it stops.
FFFF
Check the paper size displayed on the display panel.
BelliniC2_GBzen_F_FM.book Page 126 Tuesday, December 17, 2002 5:56 PM