Nashuatec Aficio 10515 Page 154 Operating Instructions Manual Download

Page: 154 / 193

143

8. Remarks

Do's and Don'ts

CAUTION:

• Do not turn off the main power switch while the On indicator is lit or blink-

ing. This may cause damage to the hard disk or memory.

• Do not touch areas on or around the fusing unit. These areas get hot.
• After making copies continuously, the exposure glass may become warm—

this is not a malfunction.

• When you use this machine for a long time in a confined space without good

ventilation, you may detect an odd smell. To keep the workplace comfortable,
we recommend that you keep it well ventilated.

• The area around the ventilation hole may become warm. This is caused by ex-

haust air and is not a malfunction.

• Do not turn off the operation switch while copying or printing. Make sure all

copying or printing has finished.

• The machine might fail to produce good copy images if condensation forms

inside due to rapid temperature change.

• Do not open the covers of the machine while copying or printing. If you do,

misfeeds might occur.

• Do not move the machine while copying or printing.
• If you operate the machine improperly or a failure occurs, settings might be

lost. Be sure to make a note of your machine settings.

• The manufacturer shall not be liable for any loss or damage resulting from

failure of the machine, loss of settings, or use of the machine.

•

Unplug the power cord from the wall outlet before you move the machine.
While moving the machine, you should take care that the power cord will not
be damaged under the machine.

BelliniC2_GBzen_F_FM.book Page 143 Tuesday, December 17, 2002 5:56 PM

Summary of Contents for Aficio 10515


































































































































































































Search results

Summary of Contents for Aficio 10515

Reviews:

Related manuals for Aficio 10515

Brands by name

Popular brands

Nashuatec Aficio 10515, Operating Instructions Manual

Search results

Summary of Contents for Aficio 10515

Reviews:

Related manuals for Aficio 10515

Brands by name

Popular brands