manualshive.com logo in svg

Nashuatec Aficio 10515, Operating Instructions Manual, Page: 18 / 193

Share
Download
Nashuatec Aficio 10515 Operating Instructions Manual Download Page 18

7

R

 

CAUTION:

 

•

Protect the machine from dampness or wet weather, such as rain and snow.

•

Unplug the power cord from the wall outlet before you move the machine. 
While moving the machine, you should take care that the power cord will not 
be damaged under the machine.

•

When you disconnect the power plug from the wall outlet, always pull  the 
plug (not the cable).

•

Do not allow paper clips, staples, or other small metallic objects to fall inside 
the machine.

•

Keep toner (used or unused) and toner bottle out of the reach of children.

•

For environmental reasons, do not dispose of the machine or expended 
supply waste at household waste collection points. Disposal can take place 
at an authorized dealer.

•

The inside of the machine could be very hot. Do not touch the parts with a 
label indicating the “hot surface”. Otherwise, an injury might occur.

•

Our products are engineered to meet high standards of quality and function-
ality, and we recommend that you use only the expendable supplies availa-
ble at an authorized dealer.

BelliniC2_GBzen_F_FM.book  Page 7  Tuesday, December 17, 2002  5:56 PM

Summary of Contents for Aficio 10515


































































































































































































Reviews:

No comments