Nashuatec Aficio 10515 Operating Instructions Manual Download Page 159

Page: 159 / 193

Remarks

148

Maintaining Your Machine

If the exposure glass or ADF is dirty, you might not be able to make clear copies.
Clean these parts if they become dirty.

❖

Cleaning the machine

Wipe the machine with a soft, damp cloth. Then, wipe it with a dry cloth to
remove the water.

Important

❒

Do not use chemical cleaners or organic solvents, such as thinners or benzene.
If they get into the machine or melt plastic parts, a failure might occur.

❒

Do not clean parts other than those specified in this manual. Such parts
should be cleaned by a service representative.

Cleaning the Exposure Glass

Cleaning the Auto Document Feeder

BelliniC2_GBzen_F_FM.book Page 148 Tuesday, December 17, 2002 5:56 PM

Summary of Contents for Aficio 10515


































































































































































































Search results

Summary of Contents for Aficio 10515

Reviews:

Nashuatec Aficio 10515, Operating Instructions Manual, Page: 159 / 193

Search results

Summary of Contents for Aficio 10515

Reviews: