Nashuatec Aficio 10515, Operating Instructions Manual

Page: 109 / 193

Paper Tray Settings
98
6
Note
❒
The number of tab stock shifts can be set to millimeters, when [ Tab Stock ]
has been selected.
❒
“Thick Paper Setting” and “Tab Stock” can be set simultaneously. Thick
Paper Setting and Color Sheet can be set simultaneously.
❖
❖ ❖
❖
Paper Size
Reference
You can select the size of the copy paper loaded in Tray 2, 3, 7, and the in-
terposer. For the paper sizes you can load for each tray, see p.172 “Copy
Paper”.
Important
❒
If the specified paper size differs from the size of paper actually set in the
paper tray, a misfeed might occur because the paper size is not detected
correctly.
Note
❒
For Tray 2 and Tray 3, setting of the selector knob takes priority. When set-
ting paper of a size not indicated on the selector knob, set the knob to the
p
mark.
❖ ❖ ❖ ❖
Thick Paper Setting
You can set the thick paper setting to
[ On ]
or
[ Off ]
.
❖ ❖ ❖ ❖
Copy Method in Duplex
You can select the copying method in duplex mode; 2 Sided Copy or 1 Sided
Copy.
❖
❖ ❖
❖
Apply Auto Paper Select
You can set the Auto Select mode to [ On ] or [ Off ] .
BelliniC2_GBzen_F_FM.book Page 98 Tuesday, December 17, 2002 5:56 PM