Napco iSecure Security System
All technical manuals are available in PDF format at
tech.napcosecurity.com
53
Programming: Sirens
1.
Go to
www.iSecureByNapco.com
and log into your iSe-
cure account.
2.
Click
Wireless Modules
>
Siren
.
3.
In the
SIRENS
screen (shown below), program each siren
in your system (up to 4 allowed) (when finished, click
Save
).
Note:
The Hub's integral siren only activates upon an Area 1
alarm. All other external sirens activate upon an alarm in
any Area
.
ISEC
-
WL
-
SIREN
Wireless Siren
TYPE
Sirens can be powered
by an AC power supply
(plugged into a 120VAC
unswitched wall outlet) or
with batteries. Select the
power type used by your
siren.
NAME
Type the siren
description you
wish to appear
on the keypad
display
RF ID
Type in the
7 digit sen-
sor ID # for
the device
STATUS
Indicates the current con-
dition of the siren, whether
active or inactive; to re
-
learn the unit, click
Re
-
learn
.
SIGNAL STRENGTH
Relative intensity of the
last transmission, on a
scale of 1
-
10 (10 being
the strongest).
Note:
A
reading of 3 or less indi-
cates reception may be
erratic; relocate the sen-
sor closer to the Hub.
1
2
3
4
