48
All technical manuals are available in PDF format at
tech.napcosecurity.com
Napco iSecure Security System
Programming: Smoke Sensors
1.
Go to
www.iSecureByNapco.com
and log into your iSe-
cure account.
2.
Click
Sensor Configuration
.
3.
In the
SENSOR CONFIGURATION
screen (shown be-
low), program the installed sensors as indicated (when
finished, click
Save
).
ISEC
-
SMOKE
Supervised Wireless Digital Smoke Sensor
DESCRIPTION
Type the sensor descrip-
tion you wish to appear
on the keypad display
SENSOR TYPE
Select "
Smoke
Sensor
".
SENSOR
FUNCTION
"
Smoke
" is au-
tomatically se-
lected when
"
Smoke Sen-
sor
" is selected
as the
"
SENSOR
TYPE
".
SENSOR ID
Type in the
7 digit sen-
sor ID # for
the device
AREA
Default = 1. See the key-
pad Operating Guide for
the definition of "Area".
ENABLE
REPORTING
Check to enable cen-
tral station reporting
1
2
3
4
5
6
SIGNAL STRENGTH
Relative intensity of the last transmis-
sion, on a scale of 1
-
10 (10 being the
strongest).
Note:
A reading of 3 or
less indicates reception may be erratic;
relocate the sensor closer to the Hub.
