NanoPhotometer
®
NP80/N60/N50/C40
User Guide Version 3.1
26
Note
: In order to install the NanoPhotometer
®
App on a tablet or smartphone, the device must have
an established internet connection to access the app store for app download.
Note
: The version of the app and the software of the NanoPhotometer
®
should be the same. Different
versions may have not full functionality.
F
IRST STEPS AND CONFIGURATION WIZARD
When starting the Implen NPOS the first time an Implen configuration wizard is shown. Please accept
the End User License Agreement (EULA) and select the country in which the NanoPhotometer
®
is
used and confirm.
P
RINTER
I
NSTALLATION
For NanoPhotometer
®
with software version 1.1.11147 or higher NO driver installation is necessary.
1.
Switch NanoPhotometer
®
on / home screen
2.
Connect DYMO/HP printer via USB cable
3.
DYMO/HP printer is ready to use after 30 seconds
For NanoPhotometer
®
with previous software versions printer driver installation is necessary.
1. Switch NanoPhotometer
®
on / home screen
2. Update to newest firmware version
Update Process:
a. Copy NPOS.bin to a USB flash drive into the root folder
b. Insert the USB flash drive into your NanoPhotometer
®
c. Select: “Assistance / Software Maintenance”
d. Click on “Update”
e. Wait until the NanoPhotometer
®
reboots
Note:
Always update the firmware on the NanoPhotometer
®
first, then update the client software
(PC/Mac, tablet, smartphone).
3. Go to “Assistance / Software Maintenance”
4. Start driver installation by a click to the “Install Driver for Printers” button
5. Wait until the following message is shown: “Installed driver for printer successfully.”
6. Go to home screen
7. Connect DYMO/HP printer via USB cable
8. Wait for 30 seconds
9. DYMO/HP printer is ready to use
Note
: In order to connect a printer to the NanoPhotometer
®
, please do so from the Home Screen.
Printers will not properly function if USB connection of printer is done from within a method.
Always
return to the Home Screen before connecting a printer.
