NanoPhotometer
®
NP80/N60/N50/C40
User Guide Version 3.1
16
Field Kit
Implen aluminum roller case for safe transportation, designed to fit in most airplane overhead bins;
special compartments for all necessary accessories, cleaning tools and samples.
Note:
Delivered w/o NanoPhotometer
®
and accessories
Note:
Operate the NanoPhotometer
®
only in the roller case when cover is open. Ensure that air
circulation is possible. Always switch the NanoPhotometer
®
off for transportation.
Barcode Reader
It is possible to import sample names from 1D and 2D barcodes. Connect a compatible barcode
reader to the USB port of the NanoPhotometer
®
and click on the sample name input window. After
scanning a barcode the sample name will be shown in the input window. The imported name can
then be edited or replaced completely.
Barcode readers that have been tested and verified compatible:
1D:
Honeywell Voyager 95X0 Single-Line Laser Scanner
Datalogic Touch65
1D & 2D: AGPtEK SC36
Honeywell Xenon 1900g
DYMO Label Printer
It is possible to connect a DYMO Label printer to the NanoPhotometer
®
for direct printing on standard
or cryo labels. Recommended and tested printers are the DYMO LabelWriter 4XL (label size 10.3 x
15.8 cm) and the DYMO LabelWriter 450 (5.4 x 10 cm). Cryo labels can be printed with both DYMO
printers using the following label format: 26 x 12.7 mm and 9.5 mm circle.
Note
: After starting the NanoPhotometer, plug in the DYMO printer. The home screen will be shown.
Wait at least for 30 seconds for driver installation.
Cryo labels (26 x 12.7 mm and 9.5 mm circle):
Note
: Orientation of cryo labels on carrier foil changed from portrait to landscape. Portrait format was
discontinued by the supplier.