![background image](http://html2.mh-extra.com/html/namco/tekken-tag-tournament/tekken-tag-tournament_operation-manual_3189947033.webp)
On the “CONVERGENCE” screen, the following “cross hatch pattern” is displayed.
ENTER COLOR EDIT : P-l
COLOR TEST : P-l
: P - l
Cross hatch pattern
Note: The above shows the screen with the color edit non-displayed. It makes no
difference if the color edit is displayed.
2
Press the
button switch 2
check the size, position, aspect
ratio, and distortion of the cross
hatch pattern on each color.
*
Each time you press the PI
button switch 2, the color of
the “cross hatch pattern”
changes from white
blue
red
purple
green light
blue
yellow
black
white
in this order.
3
When the size, position, aspect ratio of the pattern is not appropriate or distorted, refer to the
operation manual of the cabinet or contact the manufacturer of the cabinet to adjust it on the
cabinet.
4
Press the
start switch to return to the test menu screen after completing the whole
“DISPLAY TEST’.
Press the
button switch 1 to display the adjusting screen for the other adjustment in the
“DISPLAY TEST’.
PI
switch
switch
Note: The above
shows the pair
panel. In case of the single control panel
(that is, two cabinets corresponding to the
VIDEO standard
are
linked for networked head-to-head play), the control panel of the cabinet on which
the PC board is installed shall be called as
5
Perform “6-1-3 Finishing the Test Mode” (p.28) to exit the test mode.
Summary of Contents for Tekken Tag Tournament
Page 1: ......
Page 56: ...11 APPENDIX A Control Panel Layout Template Electrical Diagram 54...
Page 58: ...00 ti OG Z 00 0 66 0 6 1...
Page 59: ...3...