![background image](http://html2.mh-extra.com/html/namco/tekken-tag-tournament/tekken-tag-tournament_operation-manual_3189947019.webp)
Connecting to the Speaker
Connect the product to the speaker(s) of your cabinet
in
the following procedure so that the cabinet
outputs the sound.
First check whether your cabinet has one speaker (monaural) or two speakers (stereo).
l
One speaker (monaural)
1
the power switch of the cabinet and unplug the power cord from an electrical outlet,
2
Conduct a
to prevent short-circuit, for instance,
the edge of the unused wire
(Al,
B 1) of the extended edge harness with insulating tape.
3
After completing all the following connection, switch to “MONAURAL” in the test mode
(Ref. “6-4 SOUND TEST’ p.37).
.
Installing the PC Board on the Install Board of the Cabinet (p.ll)
l
“5-3-l Checking the
Edge Connector
l
Checking the Extended Edge Connector
l
“5-3-3 Connecting to the Control Panel (p.15)
l
“5-3-5 Connecting to the Connectors (p.18)
*
This product is set as stereo
as the factory-setting. When used as stereo
with the cabinet of the monaural
only the left speaker outputs
Two speakers
1
OFF the power switch of the cabinet and unplug the power cord from an electrical outlet.
2
Connect the wires of the terminals Al and B 1 of the extended edge harness to the right side
(R) speaker by soldering or fixing an applicable crimp-style terminal in accordance with the
following table.
electrical shock. Contact your distributor to order parts. Refer to “11. REPLACEMENT PARTS
LIST’ on p.56 for details of the replacement parts.
Soldered
side
Terminal side
Parts mounted side
Speaker R (yellow)
Al
Speaker R
Summary of Contents for Tekken Tag Tournament
Page 1: ......
Page 56: ...11 APPENDIX A Control Panel Layout Template Electrical Diagram 54...
Page 58: ...00 ti OG Z 00 0 66 0 6 1...
Page 59: ...3...