![background image](http://html2.mh-extra.com/html/namco/tekken-tag-tournament/tekken-tag-tournament_operation-manual_3189947032.webp)
2
Press the
button switch I to go the other adjustment item.
*
Each time you press the switch, it shifts from “CONVERGENCE”
“COLOR BAR”
“CONVERGENCE” . . . . . .
and its screen is displayed each
time.
button switch
start switch
\
button switch 4
Note: The above figure shows the pair
control
panel. In case of the single control panel
(that is,
corresponding to the
VIDEO standard
are
linked for networked head-to-head play), the control panel of the cabinet on which
the PC board is installed shall
called as PI.
According to the item to be adjusted, perform the procedure described under “6-2-2
CONVERGENCE”
through “6-Z-3 COLOR BAR” (p.32).
4
Press the
start switch to
to the test menu screen after completing the whole
“DISPLAY TEST’. The test menu screen (p.26) is displayed.
5
Perform “6-l-3 Finishing the Test Mode”
to exit the test mode.
6-2-2
CONVERGENCE (Checking/adjusting the size, position, aspect ratio,
distortion of the picture)
1
Perform the procedures and 2 of “6-2-l Common Operation” (p.29) to displayd the
“CONVERGENCE” screen.
*
If “DISPLAY TEST” screen appears already, common operation is not needed.
If the “CONVERGENCE” screen is not displayed, keep pressing the
button
switch 1 until it is displayed.
Note:
*
Each time you press the switch, it shifts from “CONVERGENCE”
“COLOR BAR”
“CONVERGENCE” .
and its screen is displayed each
time.
switch
The above figure shows the pair control panel. In case of the single control panel
(that is, two cabinets corresponding to the
VIDEO standard (JVS) are
linked for networked head-to-head play), the control panel of the cabinet on which
the PC board is installed shall
called as
Summary of Contents for Tekken Tag Tournament
Page 1: ......
Page 56: ...11 APPENDIX A Control Panel Layout Template Electrical Diagram 54...
Page 58: ...00 ti OG Z 00 0 66 0 6 1...
Page 59: ...3...