![background image](http://html2.mh-extra.com/html/namco/tekken-tag-tournament/tekken-tag-tournament_operation-manual_3189947003.webp)
1. SAFETY PRECAUTIONS
Be sure to
read this part for safe use
To the owner:
When the owner of this product entrusts the other person(s) to install this product on the cabinet, to
connect, to adjust for operation, to operate, to inspect, to clean, to troubleshoot, to disassemble. to
keep, to transport and to dispose, direct such a person(s) to read the applicable part of this manual
before conducting the task and to observe the instructions.
When
this product, always attach this operation manual to the PC Board.
l-l Level of Danger
In this operation manual, the matters that require attention are classified as follows according to the
level of the danger:
WARNING:
Players
technicians can be killed or seriously injured if such
danger cannot be avoided.
CAUTION:
Players
technicians can be slightly injured if such danger
cannot be avoided.
T’he matters that require attention not concerning safety but functions shall be indicated with the
mark below.
: The notices concerning the functions and protection of the product.
Readers of
operation manual
This operation
manual is written for staff of a location operating amusement game machines. But
the part noted with “To
serviced by a qualified service technician only” on the Table of Contents
and on the title of each chapter is written especially for a qualified service technician. Such a task
should be conducted only by a
service technician who would fit the following
requirements.
A qualified service
:
A person who works for designing, manufacturing, inspecting, and maintenance servicing at an
amusement machine (AM) manufacturer, and a person who has technical knowledge of electrical
engineering, electronics, and mechanical engineering equivalent to a graduate of a technical high
school or more, and conducts maintenance services (repair) of an AM equipment on a daily basis.
Summary of Contents for Tekken Tag Tournament
Page 1: ......
Page 56: ...11 APPENDIX A Control Panel Layout Template Electrical Diagram 54...
Page 58: ...00 ti OG Z 00 0 66 0 6 1...
Page 59: ...3...