![background image](http://html2.mh-extra.com/html/namco/tekken-tag-tournament/tekken-tag-tournament_operation-manual_3189947034.webp)
6-2-3
COLOR EDIT, COLOR BAR (Adjustment of the shade and tone balance of
the picture signal outputted by the PC board)
Perform the procedures 1 and 2 of “6-2-l Common Operation” (p.29) to display the “Color
Edit” screen over the ‘Color Bar” screen.
*
If “DISPLAY TEST” screen appears already, common operation 1 is not needed.
In the “Color Bar”, the following screen appears.
Each color bar of “white” “red”
blue” is displayed with gradual shading. Press
the
button switch 2 to change the shade and tone of the color from 32
16
8
4
2
32 . . .
in this order.
PI button switch 2
Note: The above figureshows the pair control panel. In case of the single control panel
(that is, two cabinets corresponding to the
VIDEO standard (JVS) are
linked for networked head-to-head play), the
control
panel of the cabinet on which
the PC board is installed shall
called as PI.
COLOR BAR
Contrast :
00
Bright R
Bright G :
Bright B :
PREVIOUS VALUE : P-l
EXIT COLOR EDIT : P-l
COLOR TEST : P-l
: P-l START
whole
(red)
Brightness
Color bar (white)
Color bar (red)
Color bar (green)
Color bar (blue)
How
to initialize the value
How to finish the color edit
How to the next test pattern
How to
to test menu screen
l
If the “COLOR BAR” screen is not displayed, keep pressing the PI button switch
until it is displayed.
Each time you press the switch, it shifts from “CONVERGENCE”
“COLOR
“CONVERGENCE” . . . . . . and its screen is displayed each
time.
If the “Color Edit” screen is not displayed, press the
button switch 4. The
“Color Edit” screen is displayed over the “COLOR BAR” screen.
*
Press the
button switch 4 to switch the “Color Edit” screen
displayed.
Summary of Contents for Tekken Tag Tournament
Page 1: ......
Page 56: ...11 APPENDIX A Control Panel Layout Template Electrical Diagram 54...
Page 58: ...00 ti OG Z 00 0 66 0 6 1...
Page 59: ...3...