![background image](http://html2.mh-extra.com/html/namco/tekken-tag-tournament/tekken-tag-tournament_operation-manual_3189947030.webp)
6-l-3
Finishing the Test Mode
After making adjustment of each item according to “6-2 Display Test”
through
Data
Clear”
display the test menu screen.
1
Hit the
S-direction joystick up or down to turn “EXIT
SAVE” in red.
2
Press the
button switch 1. The test mode finishes and it returns to the game screen.
Note: The above figure shows the pair control panel. In case of the single control panel
(that is, two cabinets corresponding to the
VIDEO standard (JVS) are
linked for networked head-to-head play), the control panel of the cabinet on which
the PC board is installed shall
called as
3
No.1 option switch
OFF.
*
In case that tbe test switch on the cabinet is used, turn that test switch OFF.
If the test mode is not finished in the above procedure, the adjusted result (setting
or altering) may not be effective. Always
the test mode in the above
procedure. (The test mode cannot be finished only turning the test switch
without selecting
SAVE”.)
6-2
Display Test (Check/adjustment of the display)
The following check and adjustment shall be made.
C O L O R E D I T
The shade and tone balance of the picture
signal
outputted by the PC board shall be checked and
adjusted.
. CONVERGENCE
It is used to check/adjust the size, position, aspect ratio, distortion of the picture.
l
It
to check/adjust the shade and the tone balance of the picture.
Before conducting any of the above, conduct the following “common operation”.
Summary of Contents for Tekken Tag Tournament
Page 1: ......
Page 56: ...11 APPENDIX A Control Panel Layout Template Electrical Diagram 54...
Page 58: ...00 ti OG Z 00 0 66 0 6 1...
Page 59: ...3...