5-4
5-4-l
Connecting the Product to the Cabinet Corresponding to
VIDEO Standard (JVS)
The explanation on connection to the cabinet corresponding to the
VIDEO standard (JVS)
and on transfer of the data to be displayed on the
cabinet is
First, perform the procedure of “5-2 Installing the PC Board on the
Board of the
Cabinet” (on
When two cabinets are linked with cables for networked head-to-head
play, the PC board can be installed to either cabinet.
Connecting to the Control Panel
This product has to be connected to the control panel (see below) described in the chapter “2.
SPECIFICATIONS” (on p.6).
&direction joystick,
E-direction joystick
button switches
Pair
panel (two persons can play in one
cabinet)
\
4 5
button switches
S i n g l e
control panel
(players can play networked head-to-head play by connecting two
c a b i n e t s
c a b l e s )
Note:
figure above shows the control panel of the cabinet on which the PC board shall be installed.
The joystick and the switches on the control panel on the cabinet that the PC board is not installed
shall be for P-2.
name of each joystick and switch in the figure above corresponds to general name of the
control panel connecting terminal (attached to the cabinet) of the cabinet corresponding to
the
VIDEO (JVS) standard as follows.
Summary of Contents for Tekken Tag Tournament
Page 1: ......
Page 56: ...11 APPENDIX A Control Panel Layout Template Electrical Diagram 54...
Page 58: ...00 ti OG Z 00 0 66 0 6 1...
Page 59: ...3...
