NAMCO Tekken Tag Tournament, Operation Manual

Page: 38 / 59

2 Make adjustment according to the description on the table below with the appropriate joystick
and the switch.
Test/Adjustment How to operate
Changing tbe sound number
The sound to be used in the
Hit the S-direction joystick to right or left to
game is selected. change the number.
Play the sound
The sound of tbe selected
Press the PI
button
switch I to play the sound.
number is played.
Switch
Monaural sound/stereo sound is Press the button switch 2 to switch.
switched.
Stereo sound test
Stereo sound output is tested.
Select the sound number press the button
switch 1. The sound is played from the left
speaker, right speaker, and finally both speakers as
stereophonic.
If something wrong is found when checking the adjustment, refer to
TROUBLESHOOTING” on
Press the
start switch
to return to the test menu screen.
PI
Pl switch
\
8
Note: above figure shows the pair control panel. In case of the single control panel
(that is, two cabinets corresponding to tbe VIDEO standard are
linked for networked head-to-head play), the control panel of the cabinet on which
the PC board is installed shall be called as
4 Perform “6-l-3 Finishing the Test Mode” (p.28) to exit the test mode.
CABINET OPTIONS (Setting VIDEO SYNC on the cabinet
corresponding to the VIDEO standard (JVS))
VIDEO SYNC setting for the cabinet corresponding to the VIDEO standard (JVS) shall be
made.
When the PC board is connected to the cabinet corresponding to the standard, this
option is not available even if it is displayed.
1 Perform the procedure 4 of “6-I-2 Selecting the Adjusting Items” Select “JVS
CABINET OPTIONS” in 3.
The following screen is displayed.