![background image](http://html2.mh-extra.com/html/namco/tekken-tag-tournament/tekken-tag-tournament_operation-manual_3189947044.webp)
4
Press the Pl start switch to
to the test menu screen.
PI,
switch
Note: The above figure shows the pair control panel. In case of
single control panel
(that is. two cabinets corresponding the
VIDEO standard
are
linked for networked head-to-head play), the control panel of
cabinet
.
5
Perform “6-l-3 Finishing the Test Mode”
to exit the test mode.
A.D.S. (Checking the data on playing results in the past)
The data on playing results in the past such
the total playing time can be checked here.
1
Perform the procedure 4 of “6-l-2 Selecting the Adjusting Items”
Select
“A.D.S.” in 3.
2
Press the Pl start switch to return to the test menu screen.
Note:
above figure shows the pair
panel. In case of
single control panel
(that is, two cabinets
to the
VIDEO standard (NS) are
linked for networked head-to-head play), the control panel of the cabinet on which
the
board is installed shall be called as
3
Perform “6-l-3 Finishing the Test Mode” (p.28) to exit the test mode.
6-9
CLEAR (Clearing various data, initializing to default settings)
The data saved even after the power is turned off can be erased or initialized to the default value as
factory-setting. This “DATA CLEAR” function is used to
the data or initialize it.
Perform the procedure 1 4 of “6-l-2 Selecting the Adjusting Items”
Select
“DATA CLEAR” in 3.
Summary of Contents for Tekken Tag Tournament
Page 1: ......
Page 56: ...11 APPENDIX A Control Panel Layout Template Electrical Diagram 54...
Page 58: ...00 ti OG Z 00 0 66 0 6 1...
Page 59: ...3...