MUTOH ValueJet VJ-1624WX Operation Manual Download

Page: 248 / 358

5 Panel setup menu

VJ-1624X/1624WX/1924WX OPERATION MANUAL

248

5.1 Setup menu

5.1.19 Longstore menu

Wash Print head with the cleaning fluid.

NOTE

• Be sure to use the dedicated cleaning fluid.

• (VJ-1624X)product number: VJ-MSINK3-CL220, VJ-MSINK3-CL1000

• (VJ-1624WX/1924WX) Model number: RJ-FGCLS (cleaning fluid for water-color ink), VJ-

DSINK-CL1000g (cleaning fluid for sublimation ink)

Setup item

Setting

Description

Longstore

Start

Wash Print head with the cleaning fluid.
• [Enter] key:

Performs head cleaning.

The following content is displayed on Operation panel.
Remove Cartridges
Remove Ink cartridge, and install Cleaning cartridge.

6.1.1 Replacing Ink cartridges

—

• [Cancel] key: shifts to the previous menu without Head

washing.

5.1 Setup menu

Summary of Contents for ValueJet VJ-1624WX







































































































































































































































































































































































Search results

Summary of Contents for ValueJet VJ-1624WX

Reviews:

Related manuals for ValueJet VJ-1624WX

Brands by name

Popular brands

MUTOH ValueJet VJ-1624WX, Operation Manual

Search results

Summary of Contents for ValueJet VJ-1624WX

Reviews:

Related manuals for ValueJet VJ-1624WX

Brands by name

Popular brands