MUTOH ValueJet VJ-1624WX Operation Manual Download

Page: 240 / 358

5 Panel setup menu

VJ-1624X/1624WX/1924WX OPERATION MANUAL

240

5.1 Setup menu

5.1.11

Head Travel menu

Sets up the range that Print head moves while printing.

NOTE

• The minimum value for the shift width of Print head is 900mm.

• Note that when the printer is set as "Media width" or "Data width", the shift width of Print head

does not become below 900mm, even though the width of the loaded media is below 900mm.

5.1.12 Multi Strike menu

Sets up the overwrite count per line.

Setup item

Setting

Description

CR Movement

Data

Print head moves the range of the print data width.
The printing speed will be improved since the moving range
of Print head is optimized.

Machine

Print head moves from origin to the maximum printable media
width.

Print head shifts within the media width.

—

• [Enter] key: saves the setting and shifts to the previous

menu.

• [Cancel] key: cancels the setting and shifts to the previous

menu.

5.1 Setup menu

Setup item

Setting

Description

Multi Strike

<1 time> to 9 times

Set the overwrite count.

—

• [Enter] key: saves the setting and shifts to the previous

menu.

• [Cancel] key: cancels the setting and shifts to the previous

menu.

5.1 Setup menu

Summary of Contents for ValueJet VJ-1624WX







































































































































































































































































































































































Search results

Summary of Contents for ValueJet VJ-1624WX

Reviews:

Related manuals for ValueJet VJ-1624WX

Brands by name

Popular brands

MUTOH ValueJet VJ-1624WX, Operation Manual

Search results

Summary of Contents for ValueJet VJ-1624WX

Reviews:

Related manuals for ValueJet VJ-1624WX

Brands by name

Popular brands