MUTOH ValueJet VJ-1624WX Operation Manual Download

Page: 301 / 358

VJ-1624X/1624WX/1924WX OPERATION MANUAL

6 Maintenance

6.2 Cleaning the printer

301

3. Press the [>] key on Operation panel to select the Cleaning mode.

•

Press [>] key to select the Cleaning mode.

•

The LED lights on Operation panel show the currently selected Cleaning mode.

•

The following figures explain the LED lights for each Cleaning mode.

NOTE

•

Head Cleaning can also be performed from Panel Setup menu.

5.3 Cleaning menu

Cleaning mode

Description

Short mode

Discharges smaller amount of ink compared to "Normal".

Normal mode

Select this mode normally.

Long mode

Discharges larger amount of ink compare to "Normal".
Used when Print head does not improve by normal head cleaning.

Short mode

Long mode

Normal mode

Summary of Contents for ValueJet VJ-1624WX







































































































































































































































































































































































Search results

Summary of Contents for ValueJet VJ-1624WX

Reviews:

Related manuals for ValueJet VJ-1624WX

Brands by name

Popular brands

MUTOH ValueJet VJ-1624WX, Operation Manual

Search results

Summary of Contents for ValueJet VJ-1624WX

Reviews:

Related manuals for ValueJet VJ-1624WX

Brands by name

Popular brands