User’s Guide ValueJet 1608 HS
Printer menu
AP-75810 - Revision 2.0
95
5
5.2.3 Cutting
media
This sub section explains how to cut roll media.
Follow the procedure below to cut roll media.
Step 1:
Verify that the operation panel display is normal and there are no printing or other
operations in progress.
Step 2:
Feed the roll media to the media cut position.
Step 3:
Open front cover.
Step 4:
Place a razor blade on the media cut groove on the media guide, and cut the roll
media.
Caution
When printing is finished, the media guide is at high temperature.
Wait until the media guide has cooled down sufficiently.
Caution
Pay attention to the following points when you cut roll media.
When you hold media, do not place your finger on the media cut groove.
Move the razor blade along the media cut groove.
1
2
3
N°
Description
1
Media guide
2
Media cut groove
3
Razor blade
Note
When loading the new roll media, cut the front edge of the media if it is not
straight.