User’s Guide ValueJet 1608 HS
AP-75810 - Revision 2.0
177
7
7.2.5
Error requiring restart
This section describes errors requiring restart and remedies.
An error requiring restart is displayed if a fatal operational failure such as the following occurs.
When an obstacle that prevents printing occurs
When a problem occurs with the electrical circuit (PCB, motor, sensor, etc.) of the printer
When a failure in the printer control program occurs
If an error requiring restart occurs, the printer stops operating after performing the following
operations.
Step 1:
The drive power automatically shuts down.
Step 2:
All lamps on the operation panel blink, and the buzzer rings continuously.
Step 3:
The operation panel displays the error message.
Pressing any key on the operation panel stops the beeping.
For an error requiring restart, operation will return to normal after removing the cause of the
error and restarting the printer.
If the same error continues to be displayed, contact the your local Mutoh dealer.
Be sure to tell us the code no. of the error message when you contact us.
N°
Display
Description
Remedy
Reference
1
E** Error [ ]
Error requiring a
restart
1. Remove obstacles
such as paper scraps.
The media is
jammed on
page 178
2. Confirm that the
replaced items are
correctly attached.
3. Switch OFF the
printer and switch it
back ON after 10
seconds.
Note
"***" in the error message is the code no. that indicates what type of error
occurred.
The command code representing the error occurred may be indicated in [ ].
For the settings on your PC side, refer to the Operating Manual attached with
your PC.