MUTOH ValueJet 1608 HS, User Manual, Page: 168 / 184

User’s Guide ValueJet 1608 HS
168 AP-75810 - Revision 2.0
The printing position is incorrect
(some parts of the media cannot be printed on)
Printing is blurred
N° Possible cause Remedy Reference
1
Is the loading position of the
media correct?
Load the media correctly.
Loading roll
media on
page 37
2
Did you set up the origin and print
position? Cancel or reset the settings of the
origin and print position.
Panel Setup
Menu on
page 105
3
Is pressure adjustment value set
correctly? Set an appropriate pressure
value.
Adjusting the
pressure on the
media on
page 48
N° Possible cause Remedy Reference
1
Are you using recommended
media?
Use recommended media.
Setting media
type on page 40
2
Are you using thick or thin
media?
Use recommended media.
Setting media
type on page 40
3
Is the media printed on the
printing surface? Confirm the printing surface of
the media and set it correctly.
Loading roll
media on
page 37
4 Did you perform Alignment? Perform Alignment.
Set the correct
distance adjust
(Step) on
page 81
5
Did you perform Media feed
compensation? Perform Media feed
compensation.
Set the correct
distance adjust
(Step) on
page 81
6
Is each heater set to the
appropriate temperature? Set it to the appropriate
temperature.
Heater settings
on page 50
7
Is pressure adjustment value set
correctly? Set an appropriate pressure
value.
Adjusting the
pressure on the
media on
page 48
Downloaded From ManualsPrinter.com Manuals