User’s Guide ValueJet 1608 HS
Basics
AP-75810 - Revision 2.0
59
3
3.4
Using the air heater
This section explains how to use the air heater.
The air heater blows hot air on the media surface during printing, which dries ink faster.
Follow the procedure below to use the air heater.
3.4.1 Filter
connection
When following the example below, the above
Connection, joints and tubes are also required.
For details, contact the air compressor manufacturer or dealer.
Step 1:
Make sure the printer is OFF.
Step 2:
Power the air compressor ON.
Step 3:
Power ON the printer.
Step 4:
Set the temperature of air heater.
Refer to
Air Heater temperature setting on page 57
When printing starts, the air heater automatically operates.
Caution
The supplied air must comply to ISO 8573-1 1.1.2 - 1.6.2:2001.
If using air that does not satisfy the quality grade, it may not only cause
inappropriate printing results but may also cause parts deterioration/
damage, or a fire.
When following the example below, the above mentioned quality grade
will be guaranteed.
Caution
Do not touch the air heater before a cooling down period of 30 minutes.
It is hot and may cause a burn.