User’s Guide ValueJet 1608 HS
Basics
AP-75810 - Revision 2.0
61
3
3.5
Replacing the ink bags
Replacement time
When the operation panel displays “[*******] InkNearEnd”
There is a small amount of ink remaining in the ink bag.
The alarm buzzer sounds. To stop the buzzer, press
Enter
.
Replace with new ink bags and ink S/C cards.
When the operation panel displays “[*******] ink end”
There is no ink remaining in the ink bag.
Printing operation stops.
The alarm buzzer sounds. To stop the buzzer, press
Enter
.
Replace with new ink bags and ink S/C cards immediately.
Important
In case of working with another type of Mutoh ink than described in this
manual, refer to the dedicated instruction sheet added to the ink kit.
Caution
Before using the ink and cleaning cassettes, be sure to read and understand
the msds-sheets which come together with the ink and cleaning cassettes.
Note
If displaying “Ink End”, printing operation is suspended even during printing.
If displaying “Ink End”, you cannot print until inserting the new ink bag.
If there is no ink bag for replacement at hand, leave the empty ink bag inserted
in the printer.
Leaving the printer with the ink bag removed may cause the print head to clog
Note
This printer is designed to use genuine ink bags.
If you use a non genuine ink bag,
Printing might become blurred, or the end of the ink in the bag might not be
correctly detected.
Any problems caused by using non genuine ink will not be covered by the
warranty. All repair expenses will be paid by the customer.