User’s Guide ValueJet 1608 HS
Basics
62
AP-75810 - Revision 2.0
Replacing steps
Step 1:
Power ON the printer.
Step 2:
Remove the ink S/C card
Caution
When handling ink bags, make sure that ink does not get into your eyes or
stick to your skin.
If ink gets into your eyes or sticks to your skin, immediately wash it off with
water.
Failing to do so might cause irritation or light inflammation of eyes.
In case of any abnormality, consult a physician immediately.
Do not disassemble the ink bags.
If disassembled, there is a possibility that ink might come into contact with
eyes or skin.
Note
Do not shake the ink bags strongly. Doing so may cause ink leakage.
Do not disassemble the ink bags. A disassembled ink bags cannot be used.
When moving an ink bag from a cold place to warm place, keep the ink bag for
three hours or more in the new printing environment before printing.
Do not refill an ink bag with ink. It may result in abnormal printing.
Note
Do not replace the ink bags when the printer is OFF.
The remaining ink may not be detected correctly, causing abnormal printing.
1
2
N°
Description
1
S/C card
2
S/C card slot