User’s Guide ValueJet 1608 HS
Printer menu
118
AP-75810 - Revision 2.0
Set 5: Media initial menu
Set the media detection type while initializing the media. Omitting media detection will shorten
operation time.
Caution
When the value in the media initial menu is set as “OFF”, “Top&width” or
“Width”, the media thickness is not detected.
When the operation panel displays “Warning! *.* =>” check if the value matches
the thickness of the loaded media. If the value is wrong, enter the correct value.
If a wrong value is set, the media may damage the print head.
Setup item
Setting
Description
Media initial.
OFF
The media is not detected
Top&Width
Detect the media width and front edge (no
thickness)
Width
Detect the media width (no thickness)
Off
Detect the media thickness only
T&W
Detect the media thickness, width and front
edge.
Width
Detect the media thickness and width.
---
ENTER
: Saves the settings and shifts to
the previous hierarchy.
CANCEL
: cancels the settings and shifts to
the previous hierarchy.