manualshive.com logo in svg

MUTOH ValueJet 1608 HS, User Manual, Page: 24 / 184

Share
Download
MUTOH ValueJet 1608 HS User Manual Download Page 24

User’s Guide ValueJet 1608 HS

Product overview

24

AP-75810 - Revision 2.0

Operation keys

N°

Key

Normal

Setup menu display

1

Menu

Shifts to the Setup menu. Shifts from Setup menu display to Normal.

2

Enter

Restarts printing during 
printing.

Shifts to the selected menu

The setting is determined and saved.

Cleaning

Press and hold for two 
seconds to clean the print 
head.

—

3

Cancel

When printing:
Terminates printing
and deletes one file of
the remaining data.

When receiving or
analysing:
Deletes data that are
already received and
analysed, and delete
the next data.

Returns to the previous menu hierarchy.
Changes made in the setting are
discarded.

Shifts from Setup menu display to
Normal.

4

<

—

The following menu changes the set value.

Origin menu

Nozzle Check

Press and hold two 
seconds or more to 
perform Nozzle Check 
printing.

—

5

>

Sets Cleaning Mode.

Down the menu level in the directory tree.

6

Backward

Media is fed backwards.

—

+

—

Changes to the previous item in the
displayed menu.

The setting is changed to the forward
direction.

The numeric value is increased during
numerical input.

7

Forward

Media is fed forwards

—

–

Pauses the print during 
printing.

Changes to the previous item in the
menu.

The setting is changed to the reverse
direction.

The numeric value is decreased during
numerical input.

8

Power

Powers the printer ON 
and OFF.

Switches the printer ON and OFF.

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for ValueJet 1608 HS

























































































































































































Reviews:

No comments