MUTOH ValueJet 1608 HS, User Manual, Page: 32 / 184

User’s Guide ValueJet 1608 HS
Basics
32 AP-75810 - Revision 2.0
3.2 Loading media
3.2.1 loading rigid media
This section explains how to load rigid media.
Caution

When printing on resin board, aluminium sheets (including composite sheets),
steel sheets, glass or other rigids, do not place them directly on the rigid
printing table.

Doing so may cause erroneous printing.

The grid roller will become worn and media will not be fed correctly.
Note

The following media can be loaded on the rigid printing tables

Weight max 5 kg

Length max 1200 mm

Width 1600 mm

Thickness max 10 mm.
Note

We recommend working with the rigid printing tables when printing on rigid
materials.

Please refer to the Installation Guide of the rigid printing tables for more
information.
Note

Use mild detergent to wipe off dirt or dust before using thick media.

When printing on thick media, use both air and platen heater.

When printing using only one of the heaters, the heated surface of the thick
media expands, which warps the media, causing head friction.

The set temperatures for the air heater and platen heater vary depending on the
material and width of the thick media you are using.

Try printing on the thick media you are using once to set the temperature.
Refer to
Heater settings on page 50

After changing the media type, reset the media feed compensation.
Downloaded From ManualsPrinter.com Manuals