User’s Guide ValueJet 1608 HS
Printer menu
AP-75810 - Revision 2.0
107
5
User media menu
Note
If non-compatible media is used, the following problems may occur:
Media detection error
Slant, snag and wrinkle of media. This could lead to media jams.
Optimum printing quality cannot be obtained due to blots, blurs and dirt of ink.
End detection of roll media cannot be performed, etc.
Problems caused by using non-compatible media will not be covered by the
warranty. Repair expenses will be paid by the customer.
Setup item
Settings
Description
Type 1 to 30
Print Mode
Set up the print mode according to the used
print data or print speed.
ENTER
: shifts to the next hierarchy.
PF Adjust
Various settings on the media feed
compensation can be set.
>: shifts to the next hierarchy.
Pre Heater
Set up the Pre Heater temperature.
ENTER
: shifts to the next hierarchy.
Platen Heater
Set up the Platen Heater temperature.
ENTER
: shifts to the next hierarchy.
After Heater
Set up the after Heater temperature.
ENTER
: shifts to the next hierarchy.
StandbyHeating
Set up whether the heater is preheated while in
standby mode.
ENTER
: shifts to the next hierarchy.
Air heater
sets the air heater temperature.
Vacuum Fan
Set up the vacuum fan operation.
ENTER
: shifts to the next hierarchy.
Thickness Adjst.
Adjusts the media thickness.
---
CANCEL
: saves the settings and shifts to the
previous menu