Muratec MFX-C3400 User Manual Download

Page: 91 / 188

Operation > 89

Deleting an F-Code Box

Press the

SETUP

button on the control panel.

Press

Admin Setup

Enter an administrator's password and press

Enter

Press

Fax Setup

Press

F-Code Box

Press

Delete

Select the F-code box you want to delete.

If an ID Code is required, enter the number (4 digits) using the numeric keypad.

Press

Yes

to confirm deletion or

to cancel.

Transmission using a Sub Address (F Code Transmission)

By entering a sub address and password, F-code secure transmission, F-code bulletin

transmission and F-code polling transmission can be performed.

Place your document(s) with text face UP in the ADF or face DOWN on the glass.

Press the

Fax

button on the control panel to prompt the

Fax Ready

screen.

Press

Others

Press

F-Code Tx

Using the numeric keypad, enter the sub address that is registered in the recipient

machine.

Press

Enter

Using the numeric keypad, type in the password and press

Enter

Press

Close

to return to the standby screen.

Enter the fax number of the recipient machine and press the

Mono Start

button.

NOTE
You cannot delete an F-code box in which documents are stored, it must be
empty.

NOTE
Before operating, ensure you have the necessary sub address and password
to hand.

NOTE
If there is no password specified, leave blank and press Enter.

NOTE
The numeric keypad, speed dial, address list and group can be used for
entering numbers.

Summary of Contents for MFX-C3400





























































































































































































Search results

Summary of Contents for MFX-C3400

Reviews:

Related manuals for MFX-C3400

Brands by name

Popular brands

Muratec MFX-C3400, User Manual

Search results

Summary of Contents for MFX-C3400

Reviews:

Related manuals for MFX-C3400

Brands by name

Popular brands