Muratec MFX-C3400 User Manual Download

Page: 153 / 188

Troubleshooting > 151

If your MFP has a duplex unit installed, press the cover release (1) at the center of

the unit, open the cover and remove any sheets in this area, then close the cover.

Lift the front cover release and pull open the front cover.

10.

Check inside the cover for sheets in this area and remove any that you find, then

close the cover.

11.

Pull out the paper tray and ensure that all paper is stacked properly, is undamaged,

and that the paper guides are properly positioned against the edges of the paper

stack. When satisfied, replace the tray.

12.

Close the top cover and press down firmly at both sides so that the cover latches

closed.

NOTE
If the paper is not advanced enough to grip, pull the duplex unit (2) out of the
machine and remove the paper. Refit duplex unit.

NOTE
If the paper is not advanced enough to grip, rotate roller (1) as shown to
advance the paper.

Summary of Contents for MFX-C3400





























































































































































































Search results

Summary of Contents for MFX-C3400

Reviews:

Related manuals for MFX-C3400

Brands by name

Popular brands

Muratec MFX-C3400, User Manual

Search results

Summary of Contents for MFX-C3400

Reviews:

Related manuals for MFX-C3400

Brands by name

Popular brands