Muratec MFX-C3400 User Manual Download

Page: 121 / 188

Maintenance > 119

Lift the right-hand end of the cartridge and then draw the cartridge to the right to

release the left-hand end as shown, and withdraw the toner cartridge out of the MFP.

Put the cartridge down gently onto a piece of paper to prevent toner from marking

your furniture.

Remove the new cartridge from its box but leave its wrapping material in place for

the moment.

Gently shake the new cartridge from end to end several times to loosen and

distribute the toner evenly inside the cartridge.

10.

Remove the wrapping material and peel off the adhesive tape from the underside of

the cartridge.

11.

Holding the cartridge by its top center with the colored lever to the right, lower it

into the printer over the image drum unit from which the old cartridge was removed.

CAUTION!

The green image drum surface is very delicate and light sensitive.

Do not touch it and do not expose it to normal room light for more

than 5 minutes. If the toner cartridges need to be out of the MFP

for longer than this, please lower the top cover. Never expose the
drum to direct sunlight or very bright room lighting.

Summary of Contents for MFX-C3400





























































































































































































Search results

Summary of Contents for MFX-C3400

Reviews:

Related manuals for MFX-C3400

Brands by name

Popular brands

Muratec MFX-C3400, User Manual

Search results

Summary of Contents for MFX-C3400

Reviews:

Related manuals for MFX-C3400

Brands by name

Popular brands