Muratec MFX-C3400 User Manual Download

Page: 16 / 188

Getting started > 14

Switch the unit on and turn the mirror carriage mode off:
(a)

After warming up, “Mirror Carriage mode” screen appears. Touch

Unlock

on the

display screen.

(b)

When prompted. touch

Yes

to release the mirror carriage.

Power Save Mode

If you do not use the unit for a while, the machine will enter the power save mode to control

the power consumption of the device. To cancel or initiate the power save mode, press the

Power Save

button on the control panel.

Switching Off

Press the

Setup

button on the control panel.

Press the

ShutDown

button.

Press

Yes

to continue.

At the prompt, turn the power switch OFF.

CAUTION!

Do not turn off the power switch suddenly as this may damage your

unit. Always follow the correct procedure to ensure that no HDD

data is lost.

Summary of Contents for MFX-C3400





























































































































































































Search results

Summary of Contents for MFX-C3400

Reviews:

Related manuals for MFX-C3400

Brands by name

Popular brands

Muratec MFX-C3400, User Manual

Search results

Summary of Contents for MFX-C3400

Reviews:

Related manuals for MFX-C3400

Brands by name

Popular brands