Muratec MFX-C3400 User Manual Download

Page: 135 / 188

Maintenance > 133

...the Document Glass

The document glass needs to be cleaned occasionally to ensure optimum image quality and

performance.
Clean the glass as follows.

Open the document cover (1).

Moisten a soft, clean, lint-free cloth and gently wipe the document glass (2) and the

white sheet (3) on the under side of the document cover to remove dust or any

toner particles.

Close the document cover (1).

...the Touch Screen

To clean the display surface, use a soft cloth, either dry or moistened with neutral detergent

or ethanol.

Do not use any organic solvents, acid or alkali solutions

CAUTION!

Be careful not to stress or damage the touch screen display.

Summary of Contents for MFX-C3400





























































































































































































Search results

Summary of Contents for MFX-C3400

Reviews:

Related manuals for MFX-C3400

Brands by name

Popular brands

Muratec MFX-C3400, User Manual

Search results

Summary of Contents for MFX-C3400

Reviews:

Related manuals for MFX-C3400

Brands by name

Popular brands