Configuring Your Machine > 66
Setting the Fax Features
Initial Set Up
The following parameters
must
be set before using the fax function on your unit:
•
Time zone
•
Date and time
There are other parameters that can be adjusted to suit your personal preferences later if
required, refer to fax set up table for details (See “Advanced Set Up” on page 66.).
To set fax parameters:
1.
Press the
Setup
button on the control panel.
2.
From the touch screen, press the
Admin Setup
button.
3.
Using the on-screen keyboard, enter the admin password and press
Enter
.
4.
From the touch screen, press the
User Install
button.
5.
Select
Time Zone
and using the on-screen arrows or keypad, set the correct time
differential.
6.
If required, press
Set Daylight Saving
and select
ON
.
7.
Select
Time Setup
and using the on-screen arrows or keypad, set the correct date
and time.
8.
Press
Enter
to confirm.
9.
Press
Enter
to enable.
Advanced Set Up
Your machine offers a multitude of features which reduce the time required for manual
operation and make fax communications more efficient.
NOTE
If you ran the driver installer program from the CD-ROM you may have already
set the time zone, date and time via the Panel Downloader utility.
NOTE
If connecting the machine through a private branch exchange (PBX) line, you
must also specify a dial prefix to allow the machine to obtain an external line
before dialling. Refer to “Connecting to a PBX” on page 69.
Summary of Contents for MFX-C3400
Page 186: ...Subnet Mask 24 S Scanner unit log in 72 log out 72 ...
Page 187: ......
