Muratec MFX-C3400 User Manual Download

Page: 139 / 188

Installing Upgrades > 137

Identify the RAM expansion slot in the machine.

The maximum capacity of your machine is 768 MB, therefore the existing 256 MB

board must be removed from the RAM expansion slot before the new memory

upgrade board can be fitted. To remove it:
(a)

Grip the board firmly by its short edges and pull it out of the slot.

(b)

Place the removed memory board into the antistatic bag which originally

contained the new memory board.

Hold the new memory board by its short edges, so that the edge connector faces in

towards the RAM expansion slot, and the small cutout is closer to the bottom of the

machine.

Gently push the board into the RAM expansion slot until it latches in and will not go

any further.

Summary of Contents for MFX-C3400





























































































































































































Search results

Summary of Contents for MFX-C3400

Reviews:

Related manuals for MFX-C3400

Brands by name

Popular brands

Muratec MFX-C3400, User Manual

Search results

Summary of Contents for MFX-C3400

Reviews:

Related manuals for MFX-C3400

Brands by name

Popular brands