Muratec MFX-C3400 User Manual Download

Page: 128 / 188

Maintenance > 126

Lift each of the image drum units out of the MFP and place them in a safe place away

from direct sources of heat and light.

Locate the two fasteners (1) at each side of the belt and the lifting bar (b) at the

front end.

Turn the two fasteners 90° to the left. This will release the belt from the MFP

chassis.

Pull the lifting bar (2) upwards so that belt tilts up towards the front, and withdraw

the belt unit from the MFP.

CAUTION!

The green image drum surface at the base of each cartridge is very

delicate and light sensitive. Do not touch it and do not expose it to

normal room light for more than 5 minutes. If the drum unit needs

to be out of the MFP for longer than this, please wrap the cartridge

inside a black plastic bag to keep it away from light. Never expose

the drum to direct sunlight or very bright room lighting.

Summary of Contents for MFX-C3400





























































































































































































Search results

Summary of Contents for MFX-C3400

Reviews:

Related manuals for MFX-C3400

Brands by name

Popular brands

Muratec MFX-C3400, User Manual

Search results

Summary of Contents for MFX-C3400

Reviews:

Related manuals for MFX-C3400

Brands by name

Popular brands