Muratec MFX-2590 Quick Manual Download Page 105

Page: 105 / 317

3-20 Basic Faxing

Load the document, and press <Fax>.

For details on loading documents, refer to Chapter 1, “Loading Documents” in the User’s

•

Guide.
Set the resolution and contrast as necessary.

•

(See page 3-21.)

Press the [Address Book] tab or the [Num. keys] tab.

Press [Broadcast].

The broadcast function is enabled / disabled each time you press [Broadcast].

Specify the destination.

For details on specifying the destination, refer to “

Selecting from the Address Book

”.

(See page

5-2.)

Repeat step 4 to specify all the destinations.

If you specify a destination in the address book, that destination will be canceled if you

•

select it again.
Press [Location] to confirm or delete the specified destinations. For details, refer to

•

“

Confirming Specified Destinations

”.

(See page 5-17.)

Summary of Contents for MFX-2590






























































































































































































































































































































Search results

Summary of Contents for MFX-2590

Reviews:

Muratec MFX-2590, Quick Manual, Page: 105 / 317

Search results

Summary of Contents for MFX-2590

Reviews: