Muratec MFX-2590 Quick Manual Download Page 166

Page: 166 / 317

1
2
3

Advanced F

ax Functions

Various Fax Functions 4-19

Go back to step 6 on “

Creating a New Document

Specifying the Transmission Time (Delayed Transmission)

You can use this function to specify the date and time to perform transmission.

You can specify a time and date up to a month ahead. The document for delayed

•

transmission is stored in memory until the specified time, at which point transmission

will start.

If real time transmission is specified, the document will remain loaded until the

•

specified time, so you will not be able to copy, scan, or transmit other faxes.

This function can be also specified in combination with other functions (such as

•

broadcast, polling, F-Code transmission, and F-Code polling).

Load the document, and press <Fax>.

Press the [Advanced] tab.

Press [Delayed Transmission].

Select [ON].

Press [OFF] to disable delayed transmission. If you selected [OFF], press [Enter] and proceed
to step 8.

Summary of Contents for MFX-2590






























































































































































































































































































































Search results

Summary of Contents for MFX-2590

Reviews:

Related manuals for MFX-2590

Brands by name

Popular brands

Muratec MFX-2590, Quick Manual

Search results

Summary of Contents for MFX-2590

Reviews:

Related manuals for MFX-2590

Brands by name

Popular brands