1
2
3
Basic F
ax Functions
Basic Faxing 3-23
Setting the Contrast
Set the contrast to scan with according to the document.
•
Lightest: Select to scan with the lightest contrast.
•
Lighter: Select to scan with a contrast lighter than the standard contrast.
•
Normal: Select to scan with the normal contrast.
•
Darker:
Select to scan with a contrast darker than the standard contrast.
•
Darkest: Select to scan with the darkest contrast.
Load the document, and press <Fax>.
1
Press the [Address Book] tab or the [Num. keys] tab.
2
Press [Contrast].
3
If [Contrast] is not displayed, press the [Advanced] tab and then select [Contrast].
Select the desired contrast, and press [Enter].
4
Specify the destination, and press <Start>.
5
For details on specifying the destination, refer to “
•
Selecting from the Address Book
”.
If you loaded the document in the ADF, this concludes the procedure.
•
If you loaded the document on the document glass, load the next document, and press
•
[Next Doc]. Press [Tx Start] to start transmission.
