Muratec MFX-2590 Quick Manual Download Page 111

Page: 111 / 317

3-26 Basic Faxing

Specify the destination, and press <Start>.

For details on specifying the destination, refer to “

•

Specifying Destinations

”.

(See page 5-2.)

If you loaded the document in the ADF, this concludes the procedure.

•

If you loaded the document on the document glass, load the next document, and press

•

[Next Doc]. Press [Tx Start] to start transmission.

Note

Real time transmission is not possible using the document glass. Even if real time

transmission is set, the machine will automatically switch to memory transmission.

Canceling / Checking Faxes

You can cancel fax transmissions and check currently reserved transmissions. You can

also check the communication result of the latest fax jobs.

If there is a reserved fax, <Job Confirm.



Fax Cancel> illuminates.

Canceling / Checking the Current Document

You can cancel or check the current document. On the Review Jobs screen the following

statuses are displayed for each destination.

Reserved

Displayed for a destination that has not yet started transmission.

Under execution Displayed for the destination currently being transmitted to.

Completed

Displayed for a destination that has finished transmission.

Deleting

Displayed after deleting a destination until the actual deletion process is
complete.

Redial

Displayed for a destination that is waiting for redialing.

Press <Job Confirm.



Fax Cancel>.

The information for the current document is displayed.

Summary of Contents for MFX-2590






























































































































































































































































































































Search results

Summary of Contents for MFX-2590

Reviews:

Muratec MFX-2590, Quick Manual, Page: 111 / 317

Search results

Summary of Contents for MFX-2590

Reviews: